Metal Roof Replacement in Albuquerque, NM
Thinking about trading a worn roof for metal in Albuquerque, New Mexico? Fill in the form and this free referral service hands it to one independent local roofer. That roofer looks at your roof, walks you through exposed-fastener and standing-seam panels, and writes the estimate. This site does no roof work and never sets a price.
Prefer to talk? Call now(505) 555-0183Not sure if we cover your area? Check now ↓
Roof Estimate Request
Takes 30 seconds, or call (505) 555-0183
Your details go to one independent roofer in the Albuquerque area, who contacts you directly. See our Referral Marketing Disclosure.
Moving From Shingles to Metal
Metal is a common pick when a pitched roof in the metro reaches the end of its life. Exposed-fastener panels are screwed through the face of the metal and cost less. Standing-seam panels hide their fasteners inside raised seams, leaving fewer holes for water to find, and cost more.
Metal belongs on pitched roofs. Many Pueblo-style homes here have flat roofs behind parapets, which usually take a membrane or coating instead. Inside the city, swapping a flat roof for a pitched one is called a roof conversion, and the plans and framing get reviewed before any permit is issued.
Typical Reasons to Request Metal Roof Replacement
- Strong sun at high elevation. Intense sunlight can wear down shingles and coatings faster than many owners expect. Ask how a panel's factory finish is rated to hold its color.
- Summer hail. Forecasters in Albuquerque flag hail as a risk for this part of the state from June into September. Metal can dent, so ask how each panel type and thickness copes.
- Downbursts and spring gusts. Downburst winds are a listed monsoon hazard. Ask how the panels get fastened at the eaves, rakes and ridge.
- HOA and historic-zone rules. Some HOAs limit roof color and material, and a home in a historic overlay zone such as Old Town needs a Certificate of Appropriateness before a new roof goes on. Clear both before you settle on metal.
What Moves the Price
These are published New Mexico averages for 2026, installed, per square foot of roof surface, not a quote for your house. Panel style, pitch, valleys, vents and how much old roofing comes off all shift the total. Steep or complex roofs and decking repairs lean toward the upper half.
| Cost row | Figure | Source (year) |
|---|---|---|
| New Mexico 3-tab shingles, per sq ft | about $5.00 | RoofObservations, 2026 |
| New Mexico architectural shingles, per sq ft | about $5.50 | RoofObservations, 2026 |
| New Mexico premium shingles, per sq ft | about $6.80 | RoofObservations, 2026 |
| New Mexico exposed-fastener metal, per sq ft | about $7.35 | RoofObservations, 2026 |
| New Mexico standing-seam metal, per sq ft | about $11.35 | RoofObservations, 2026 |
Standing seam runs about four dollars a square foot above exposed fasteners. The cost calculator turns these rates into a ballpark for your home.
The Usual Sequence
- You reach out. Use the form or call (505) 555-0183.
- The roofer visits. Expect measurements, a look at the deck from the attic, and a talk about panels and colors.
- A written estimate arrives. Ask for panels, underlayment, flashing, tear-off and the permit as separate lines.
- The roofer pulls the permit. Inside the city, a plain re-roof that leaves the trusses alone qualifies for express permitting and can be issued the same day. Beyond city limits, check with your town, or with the Bernalillo County planning and development office.
- Work and inspections. The old roof comes off, soft decking is replaced, the panels go on, and the roofer books the inspections.
The Difference a Local Match Makes
A roofer who works in the metro knows the city's permit desk, how monsoon storms test panel edges, and which streets sit in a historic zone. That roofer prices and does any work. This site holds no CID license; roofers may pay it for referrals, and you never pay for one.
Before signing, search the roofer on the state license search that the Construction Industries Division (CID) points to and look for GS-21, the roofing class, or phone CID at (505) 222-9800. Request certificates showing liability and workers' comp coverage, and get the manufacturer and labor warranties in writing.
- Cash only, or the full price up front. Paying everything before materials show up leaves you little leverage if the job stalls.
Good to Know
Is a metal roof loud when it rains?
It depends on what sits under the panels. Ask whether they go over a solid deck with underlayment, and how your attic insulation affects sound. Some owners enjoy the sound of a summer storm on metal and some don't, so bring it up during the visit.
Can metal go on a flat roof?
Usually not. Flat roofs here drain through parapets to canales or drains and generally get a membrane or coating. A switch to a pitched roof is a conversion, which in the city means drawings and a framing review first. Ask the roofer whether that is realistic for your house.
Will metal hold up to hail?
Hail can arrive any time from June through September here, and metal can dent without leaking. Ask the roofer to compare panel thickness and finishes. Some insurers lower premiums for impact-rated roofs on their own terms, so call yours before choosing a product.
Does a metal re-roof need a permit in Albuquerque?
Inside city limits, yes. Simple re-roofs can go through express permitting; Building Permits & Plan Review is at 505-924-3320. A home in a historic overlay zone needs the Certificate of Appropriateness first, through Planning (505-924-3860). Outside the city, check with your town or with Bernalillo County.
Also Worth a Look
Still weighing shingles? Compare them on the shingle roof replacement page, or read about storm and hail damage if a storm started this.
Book a Metal Roof Inspection
Call (505) 555-0183 or send the form. One independent roofer near Albuquerque will set up a visit and inspect the roof. The inspection and estimate come from that roofer, not this site, and you are free to turn the estimate down.